Download Driver For Samsung Syncmaster 245bw Install Update
Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. If using a screen saver, set it to active screen mode.
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.
Installation Be sure to contact with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it will be operated for 24 hours continuously such as at airports, train stations etc.
Otherwise, this may cause fire. Keep any heating devices away from the power cable. A melted coating may cause electric shock or fire. Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc.
Any increase in the internal temperature may cause fire. Put down the monitor carefully. Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If your monitor does not operate normally - in particular, if there is any unusual sound or smell coming from the monitor - contact an authorized dealer or Center.
Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. Keep the product away from combustible chemical sprays or inflammable substances. This may cause an explosion or fire. Never insert anything metallic into the monitor openings.
This may cause electric shock, fire or injury. Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports or etc or etc.
When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the monitor.
Failure to disconnect cables may damage it and cause fire or electric shock. This guide is to demonstrate a correct usage of LCD products in order to protect them from Image retention.
The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it.
Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. Package Contents Please make sure the following items are included with your monitor. Speaker package option Speaker Your Monitor Opens the on-screen menu and exits from the menu. Currently seven different modes are available: When the appears in the upper left of the screen displaying the current mode -- analog or digital input signal.
Plug the power cord for the monitor into a nearby outlet. Use appropriate connection for your computer. Using the RGB Analog connector on the video card. When connecting a speaker, be careful that the grooves of the monitor and the speaker. Connect the power line connected to the speaker to the black terminal of the monitor. This speaker is not connected to an external power source.
It is connected to a monitor for the required power. Monitor Mounting interface pad Sold separately Turn off your monitor and unplug its power cord. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. Choose your monitor model in the model list, then click the "OK" button.
If you can see following message window, then click the "Continue Anyway" button. This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage http: Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".
Click the "Properties" button on the "Monitor" tab and select "Driver" tab. Select "Don't search ,I will. Monitor driver installation is completed.
Select the "Settings" tab and click the "Advanced Properties" button. If the "Properties" button is inactive, it means your monitor is properly configured. Please stop installation Case2: This is only available for Samsung monitors and ensures that the color of the images on the monitor are the same as the printed or scanned images. Double-click the icon to start the program.
If that happens, press F5 Key. Also use to exit the OSD menu or return to the previous menu. Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. The values of fine, coarse and position are adjusted automatically. Hold down the menu button for more than five seconds to activate the OSD adjustment lock function. Not available in MagicBright mode of Dynamic Contrast.
Menu You can use the on-screen menus to change the brightness according to personal preference. MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality.
Returns to the original mode. Demo The screen before applying MagicColor appears MagicColor on the right and the screen after applying MagicColor appears on the left. Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after Fine adjusting the frequency clock speed.
Change the transparency of the background of the OSD. You can set the amount of time the menu will wait before it is Display Time turned off. Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your Symptom Check List No images on the Is the power cord screen.
Connected using the DVI cable? Display OSD Menu to prevent changes? The screen shows Is the screen strange colors or displaying only one just black and color as if looking at Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. The program can be downloaded http: How can I set the Power Saving function?
Self-Test Self-Test Feature Check Warning Messages Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check Turn off both your computer and the monitor.
Environment The location and the position of the monitor may influence the quality and other features of the monitor. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet one meter of the monitor.
Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency.
E Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. Authority Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co. Samsung is the registered trademark of Samsung Electronics Co. Page of 55 Go. Add to my manuals Add. Samsung syncmaster lcd monitor quick start guide 16 pages. Page 2 Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.
Page 3 Do not use a damaged or loose plug.
Samsung SyncMaster 245B, 245BW Owner's Manual
Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. If using a screen saver, set it to active screen mode. Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. Installation Be sure to contact with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it will be operated for 24 hours continuously such as at airports, train stations etc. Otherwise, this may cause fire.
Store Demo mode is for retailers to display the product for consumers to use and view. The steps below are a functionality of your computer, not your monitor. If this guide does not work or any of Extending Display to a Second Monitor. This article describes the following: We weren't able to find any results for your search. No search result found for Manuals " ". No search result found for Downloads " ". Please send us an email for general questions or technical support and we will reply within 24 hours.